Windows Server 2008 R2 Activation

This article will talk about how you can activate Windows 7 and R2 using the KMS server.

Firstly, of course, you must have a KMS server installed and activated.

You can verify the functionality of the KMS server using the following commands:

Cscript slmgr.vbs / dli

Cscript slmgr.vbs / dlv

Next, make sure that the system time of your computer and the activation server match. Ideally, they should be synchronized via NTP with a single time server.

Windows Server 2008 R2 Activation

Then we open the command line with administrator rights and sequentially execute the following commands (be sure to wait until the end of each command). In the event that you use a license such as Volume (VL), then the first command does not need to be executed!

slmgr / ipk xxxxx. xxxxx. xxxxx. xxxxx. xxxxx

slmgr / skms

where is the name (ip address of your KMS server)

xxxxx. xxxxx. xxxxx. xxxxx. xxxxx. the key to your Windows edition

You may also like

  • Redmi Airdots Headphones Do Not Pair
    Profitable kitYou save 0 UAHFeatures: Bluetooth 5.0 support The weight of each earphone is only 4.1 grams Comfortable and secure fit Battery life up to 12 hours (with charging case) Multi-function but...
  • How to Translate Windows 7 Ultimate Into Professional
    Hello, tell me, can I change the version of Windows without reinstalling? For example, from the home version to the professional? The answer is short. it is possible, but this is not a documented oppo...
  • Iphone Xr On 2 Sim How To Identify
    (PRODUCT) RED, yellow, white, coral, black, blue 64 GB 128 GB Liquid Retina HD Display Multi-Touch LCD display on the entire front panel. With a diagonal of 6.1 inches and IPS technology. 1792 × 828 p...
  • For What Market Iphone 11 Pro
    The first Apple presentation of 2019!Apple officially announced its first presentation in 2019. It, as expected, will be held on March 25, beginning at 20:00 Moscow time. What new products to expect f...
  • How to Log Into Icloud Storage From iPhone
    With iCloud for Windows, you will have access to your photos, videos, mail and calendar data, files and important information on any Windows device and computer.Access the right data on any deviceAfte...
  • How to Replace an Iphone 4s Charging Connector
    Latest ArticlesAfter a call to our service center, the customer voiced a problem. Bosch washing machine does not drain water. Master.Electrical equipment often breaks down, 1 of the most urgent tasks ...

Public GVLK keys for Windows 7 and Windows Server 2008 R2

These keys are used to change the OS key from the MAK version (local key) to the KMS key:

After setting the KMS installation key, activation of the KMS client can be performed using the “System” element on the control panel. You can also activate Windows on the KMS server using the command:

Slmgr.vbs / ato

Chewga no longer rolls? 🙂

It is wrong to use Chewga somehow in a corporate environment with a license agreement &# 128578;
It’s already paid for everything, Shura!

And what is described above, which is much more legal? &# 128578;

Hmm, live a century, learn a century)

Who knows how to get counter values slmgr.vbs / dlv
Without opening an additional window? Those. what values ​​were issued to the console or at least in the registry where to look if there is?

You can try to run the script on the command line like this:

Video: Windows Server 2008 R2 Activation

cscript.exe slmgr.vbs / dlv

I didn’t understand anything and was horrified because it remains before activation
only 2 days. Why do I need such a punishment ?!

Hello! Tell me, for what periods of 2 hours and 7 days, as I understand it, this is the period of re-activation, but which one and why are there two of them?

KMS client tries to update its activation on the KMS server every 7 days. If activation failed, activation attempts are made every 2 hours.

Good day! For some time now, problems began with the activation of Windows 8.1 PRO RUS on the KMS server. A license to activate through a specific KMS server is documented. Of 8 computers, only 3 were immediately activated and activation is still working. And with the rest it gives out: “Error 0xC004C008. The activation server detected that the specified product key could not be used“. In the distribution itself, issued by the organization, the key is sewn:.C9WKB (partial). As recommended when issuing a license, during installation on each computer I skip the key entry point, and then after a full installation I specify the path to the KMS server through the slmgr.vbs script with the / skms switch. The server responds by domain name, by IP address. And on the other 5 refuses to activate this way.

On 5 computers, I first change the wired key to the following (found in the Internet): 9D6T9 (partial) and then activate it through the KMS server. It is activated immediately and to this day holds.

The question is this: indicating a different key, I do not violate the license agreement?

If your Microsoft contract covers all these computers, feel free to change the key on the remaining 3 computers to the public GVLK (that one is there. 9D6T9, see article aktivaciya-windows-8-1-i-windows-server-2012-r2 /) and activate the OS on your KMS server. In this case, you will not break anything and legally activate the OS.
Most likely, initially a certain key was already installed on these computers (retaill, mak, it could be wired both by the manufacturer and by cloning the image).

THANKS Many thanks for the important information. That’s exactly what I did. Now, at least my conscience is clear before the leadership;) And then everything seems to work like a clock, and then [pah-pah, don’t get some kind of check, it turns out that. the king is naked! :)] all the bumps will fly to me;)

THANKS again for your help !!

To display the error text, run the command “slui.exe 0x2a 0xC004F015” on a computer running a release of Microsoft Wondows that is not a release of Core.
Error: 0xC004F015
Please tell me how to fix this problem?
OS: Microsoft Windows 7 x64 Maximum SP1

What OS on KMS server? What key is installed on it? From the KMS client, is the server accessible on port 1688?

Good afternoon! Tell me, if the organization had one key for the office, let’s say 20 licenses, and she bought 20 more licenses, but the kms key is already different. In this situation, how to activate 2 keys for the same product on the same KMS server?

You may also like