How to Change Screen on Iphone 5s

IN iPhone 5s A 4-inch Retina display is installed, the oleophobic coating of which does not leave fingerprints, and the Gorilla Glass protects the screen from minor scratches and chips. Nevertheless, no matter how hard the manufacturer tries, glass iPhone 5s everything is also subject to scratches and if used improperly, it can be broken.

How to Change Screen on Iphone 5s

Fortunately, the design of the new phone makes it easy to replace the screen without any special skills. Follow our instructions and you will succeed.

And so, let’s get started. We will need:
– special Pentalobe screwdriver;
– a set of tools for the safe disassembly of the housing;
– a set of small Phillips screwdrivers;
– new screen for iPhone 5s.

Step 1.
Turn off the phone and use a paperclip to remove the SIM card.

Step 2.
Using a Pentaglobe screwdriver, unscrew the 2 screws from the bottom of the unit.

Step 3.
Lift the LCD screen with the special metal tool from the kit. Slide the plastic picks along the antenna to release all the mounts along the screen.

ATTENTION: Carrying out this operation, be extremely careful and try not to damage the internal loops.

Step 4.
Disconnect the loops of the fingerprint sensor and the Lighthing-connector.

Step 5.
Using a Phillips screwdriver, unscrew the 4 screws securing the metal plate that covers the display connector.

Step 6.
Using a special tool for safe disassembly, disconnect the 3 connectors and remove the display.

Step 7.
Remove the 3 screws on the metal insert that covers the speaker, and disconnect the speaker itself. Using a special tool for safe disassembly, disconnect the cable for the light sensor, front camera and microphone.

Step 8.
Remove the 3 screws on the metal plate in the area of ​​the home button and remove the button itself along with the cable. Using Phillips screwdrivers, unscrew the 4 screws and remove the protective thermoplate of the display.

Step 9.
Install the display thermoplastic and the Home button on a new screen iPhone 5s.

Step 10.
Connect the cables for the light sensor, front camera, microphone and speaker back to the metal insert of the LCD.

Step 11.
Connect the remaining 3 connectors to the motherboard and fasten the metal plate with 4 screws.

Step 12.
Connect the fingerprint sensor cable.

Step 13.
Replace the LCD screen, make sure. that all fasteners are tightly fixed.

Step 14.
Use a Pentaglobe screwdriver to tighten the 2 screws on the bottom of the unit.

Step 15.
Insert a SIM card and turn on the phone.

All! You managed to replace the screen in a new one yourself iPhone 5s.

detailed instructions are available on the video: